New Products
New Products
8 oz. Transparent Pump Leak Proof Alcohol Bottle
This transparent press type pump leak proof alcohol bottle can contain 250ml solvent, not only alcohol but also other liquid. Pump style makes it convenient to control the consumption. Lockable design can avoid any press by mistake.
This bottle can be usded to contain different solvent, such as acetone, nail polish remover, make-up remover, astringents, alcohol, HDPE. When contained with alcohol, you can dip the swab or brush into the solvent in the dish to clean connectors, adaptors and so on after fliping up the cap and pressing down on the spring-loaded top.
Why Should We Clean the Connectors
Research has shown over 85%of fiber optic network failures in data centers, campus, and other optical communication facilities are caused by contamination on the optical connector end face.
For best optical performance,one of the most basic and important procedures for the maintenance of fiber optic systems is to clean the fiber optic equipment.
Features and Application
Locking pump will not leak when engaged - suitableWide opening that is easy to fill | High density polyethylene suitable for many solventsTranslucent - allows easy viewing of contents |
Structure Drawing & Specification
Fiber Optic Products Maintenance
Fiber Optic Connector Inspection Steps:
Clean:Clean the end face of all components in each mated pair to avoid contamination before connection.
Inspect:Inspect each mated pair with a Fiber Inspection Microscope to verify end face cleanliness. If contamination is present, re-clean and re-inspect each mated pair. (Warning: Invisible laser radiation might be emitted from disconnected fibers or connectors. Do not stare into beams or view directly with optical instruments.)
Connect:Make each connection immediately after successful visual inspection of the mated pair.
RE-Clean:If you disconnect the connections, please re-clean and re-inspect all components before you connect.