New Products
New Products
4 Channel HD-SDI over SM Unidirectional optical fiber transmitter and receiver set with embedded audio FC 20km
HD SDI video signal can be transmitted through one single fiber with non-distortion, high-quality, long-distance transmission.
This series of video to fiber converter is with Stable performance, clear picture quality,and high Stability for LED Status Indication on the body of device.
The working status of devices can be visually observed.
At the same time,the switch value,voltage,working status and other reverse useful signal information can be controlled by data RS485.This makes our devices more flexible when different customers’ request comes.
The FS3040-T/R could transmit HD/SD-SDI as per SMPTE 292M and 259M, with or without embedded audio and data, as well as DVB-ASI over one single mode or multimode fiber. Signals are equalized and re-clocked prior to fiber optic transmission.
And HD-SDI Unidirectional Fiber Optic Transmitter should be worked with HD-SDI Unidirectional Fiber Optic Receiver.The price on the website is for Pair.
Features
Video Channel: 4-ch Undirectional HD-SDI Audio Channel: 4-ch Forward embedded audio Data Formats: 1-ch Reversed RS485(simplex) or 1-ch Reversed RS422/RS232(full duplex) Transmission Distance: 20km Fiber Type: Single-mode Simplex CRAFT: Uncompressed technology VIDEO SPEC: 1080P 30 Hz Range from 19.4Mb/s to 1.485Gb/s SMPTE 292M (1.485Gb/s) clock recovery Support all SMPTE 295M standard, 143Mb/s - 360Mb/s Support SMPTE 305M (SDTi), SMPTE 310M (19.4Mb/s), SMPTE 344M (540Mb/s),M2S and DVB-ASI (270Mb/s) standard Output wavelength 1310nm,1550nm and 16 types of CWDM (ITU-T G.694.2 compliant) 150m automatic cable equalization, all the 1.485 Gb/s rate below(Belden 1694A)LED Status Indication to monitor the working conditions and critical parameters Optional network management systemSupport SFP transceiver hot-pluggedSupport stand-alone, 1U rack mount and 4U rack mount
Applications
Remote OB Van/Truck Video Feeds Broadcast Studio Camera Feeds Long-haul Signal Transport TV station/video conference Lecture Hall Projector Connectivity Medical/Surgical Room Broadcast Building to Building video conference callingSmall corporate campus video links
Product connection diagram
1. Video Interface: High-Definition SDI Video Input (input for signal to be transferred)
2. Fiber-optic video transceiver mark:
T: fiber-optic transmitter
R: fiber-optic receiver
Power Indicator (ON for power-on; OFF for power-off)
TX: rns on upon receiving optical signal; turns off when no optical signal is received
485/232: Turns on when there is reverse data signal output, or turns off when there is not.
4. Data Interface: Reverse Data Output (for transmission of data sent to optical received)Left: Positive Terminal of Data Output
Middle: Negative Terminal of Data Output
Right: Earth Terminal (unnecessary for RS485/232 double wires)
Front Panel Details
Dimension
Make to Order (Extend information)
Interface Type | Stereo Audio | Fiber Type | Fiber Port | Data Port | Power Supply | Package | SNMP |
4 CH HD-SDI | 1-4 channel Forward 1-4 channel reverse 1-4 channel bidirectional | Single-mode Simplex | FC ST SC LC | 1-4channel Forward RS485/RS232/RS422 1-4 channel reverse RS485/RS232/RS422 1-4 channel bidirectional RS485/RS232/RS422 | AC100~240V | stand-alone 1U rack mount | With Without |
Note:
1.Audio and Data channels : For stand-alone packaging, it can accommodate up to 4 channels; for rack mount packaging, it is available for more than 8 channels. Please contact us at [email protected] , if you have any requirements.
2.Fiber Port: FC & ST connectors as defaulted choice ; If SC or LC connector needed , patch cable and adapter will be free offered to you for the converting.
3.Data Port: 1,2,4 Channels data port for additional adding are available (Forward, Reversed or Bidirectional RS485/RS422/RS232 data for choice). For detailed price and customized information, Please contact us at [email protected]
4.1U rack mount: The standard 1U Rack Chassis with 4 slots, FiberZON will free offer you the dam-board when some slots unused.
Serial TV BNC Input | Serial TV BNC Output (EO/OE) | ||
TV signal standard | SMPTE 292M, 259M, 297M, 305M, 310M, M2S, DVB-ASI, DVB-SSI and other Telecom/Datacom rate (19.4Mb/s - 1.485Gb/s) | No. of channels | 4 |
Signal level | 800mV nominal | ||
Rise/fall time | 200Ps nominal | ||
No. of channels | 4 | Overshoot | <10%amplitude |
Reflection loss | >15DB | Reflection loss | > 15dB |
Equilibrium | 0-150m @ 1.485Gb/s | Jitter | < 0.2UI |
Connector | 75Ω BNC | Connector | 75Ω BNC |
Data | Optic Output | ||
No. of channels | 1 | No. of channels | 1 |
Data format | Reversed RS485(simplex) or Reversed RS422/RS232(full duplex) | Type | Single-mode fiber (multimode optional) |
Data rate | DC to 300 Kb/s | Wavelength | 1310nm/1550nm |
Connector | Wire connecting terminal | Reflection loss | > 15dB |
BER | 10E-9 | Jitter | < 0.2UI |
Connector | FC/PC(SC/PC optional) | ||
Power and environmental indicator | |||
Operating temperature | -45 +50 | ||
Pressure | 1A@12VDC | ||
Power | 12W | ||
EMI/RFI | FCC Part 15 Class A, EU EMC standard | ||
Average time trouble-free | >100000 hours | ||
Mechanical | |||
Dimension | 173mm (H) ×276mm (D) ×40.6mm (W) | ||
Weight | 2Kg | ||
1U Rack | Optional |