New Products
New Products
Low Loss MTP-12LC Duplex 9/125 Single-mode Fiber Optic Harness Fan-out/Breakout Cable
Connector A | MTP | Connector B | LC UPC (12) |
Fiber Category | 9/125 m SMF | Fiber Count | 24 |
Fiber Type | Duplex | Wavelength | 1310nm |
Cable Jacket | 3.0mm LSZH-Yellow | Fan-Out Diameter | 2.0mm |
Insertion loss, max. | 0.35dB | Return Loss,min. | MTP 55dB, LC 50dB |
Breakout Length | 0.5m | Durability | 500 times |
Min. Bend Radius Installation | 29 mm | Min. Bend Radius Operation | 15 mm |
Tensile strength | 400 N | Crush resistance (Reversible) | 750 N/10 cm |
Operating Temperature | -40 to +80C | Fiber Grade | G652D |
Key Features and Applications
Allow seamless integration into the most common SAN directors Ensuring efficient use of horizontal and vertical rack pathways, improves the airflow Provide consistent quality, ensure system performance Compliant to IEC-61754-7 and TIA-604-5(FOCIS-5) standard | Storage Area Network(SAN) Local Area Network(LAN) Switch Parallel Processing Applications Equipment Distribution Area (EDA) Patch Field Applications |
What LC leg length should I use for a MTP to LC Harness
1. Figure 1 is about four types of connector order for your reference, please confirm the length and sort order according to your installation requirement.
2. From which direction should the staggered harness cable utilizing your switch Figure 2 illustrates the different cabling directions.
Guidelines for Fiber Polarity
Polarity | Key Position | Fiber Features | 12 Fibers Laying | Application |
Type A (straight through transmission) | Key up | Each fiber is in the same position on each end | 1 to 1...12 to 12 | Typically for connecting FAPs and cassettes in 10Gbps networks |
Type B(full flipped transmission) | Key up | The fiber is fully flipped on either end | 1 to 2 3 to 4...11 to 12 | Connecting to QSFP+/CFP/FAPs or cassettes in 10G to 40G/100G |
Related Assemblies
High Quality MTP-LC Cable Guarantee
a.High-performance polishing machine, and complemented by precision plates holders designed for MT ferrules.
b.3D interferometer provides verification of MTP/MPO polishing process, and making all parameters of the polished MT ferrule complies and exceeds industry standards.
c.The flexibility of the tester provides the complete spectrum of optical testing required for complex and high fiber count cable assemblies.