New Products
US$7.40
Why Should We Clean the Connectors
Research has shown over 85%of fiber optic network failures in data centers, campus, and other optical communication facilities are caused by contamination on the optical connector end face.
For best optical performance, one of the most basic and important procedures for the maintenance of fiber optic systems is to clean the fiber optic equipment.
FiberZON.COM's 1.25mm Fiber Optic Mini Foam Clean Sticks is an excellent dissipative swab for both dry cleaning and wet cleanging. It is the ideal tool for cleaning bulkheads after installation. It is often used to remove any contaminants on the end faces of connectors and inside the adapters.
Structure Drawing & Specification
Fiber Optic Cleaning Guide
Please note the cleaner is applicable for both connectors and adapters.
Fiber Optic Products Maintenance
Fiber Optic Connector Inspection Steps:
Clean:Clean the end face of all components in each mated pair to avoid contamination before connection.
Inspect:Inspect each mated pair with a Fiber Inspection Microscope to verify end face cleanliness. If contamination is present, re-clean and re-inspect each mated pair. (Warning: Invisible laser radiation might be emitted from disconnected fibers or connectors. Do not stare into beams or view directly with optical instruments.)
Connect:Make each connection immediately after successful visual inspection of the mated pair.
RE-Clean:If you disconnect the connections, please re-clean and re-inspect all components before you connect.