Sunday 05 June, 2022 |
Advantages and wiring application of 10G SFP+ DAC
by www.fiber-mart.com
Network generic cabling is becoming more and more popular. As a high bandwidth and high security data transmission medium, optical fiber cable is widely used in various large and medium-sized networks. However, due to the high cost of optical fiber cable solutions, in some cases, copper core high-speed cable still plays an important role. For example, 10G SFP+ DAC direct attach cable is the high performance of 10G data center short-distance transmission application Price ratio solution. So next, we will introduce the advantages and wiring applications of this high-speed cable.
Advantages of 10G SFP+ DAC:
10G SFP+ DAC is a copper cable designed with both ends of the SFP+ connector. It is more flexible to use 10G SFP+ DAC for wiring, with a transmission distance of up to 15m, and less difficult to operate in the actual construction process. 10G SFP+ DAC wiring saves connection equipment, does not need to use distribution frame, and servers and network equipment can be directly connected to tor switch, which indirectly saves investment cost.
The 10G SFP+ DAC provided by fiber-mart.com usually supports a link length of 15m, which has the advantages of low power consumption and low latency. Therefore, it has become an ideal choice for the connection between the server and the switch. The 10G SFP+ AOC supports a link length of 100m, and is a low-cost solution to replace the optical module. Therefore, it is usually used for the connection between the switch and the switch.
10G SFP+ DAC cable and switch connection solution:
10G SFP+ DAC cable is widely used in the interconnection between 10G Optical fiber network cards, the interconnection between 10G tor switch and server, and the stacking of 10G Ethernet switches.
10G SFP+ DAC cable and 10G Optical module, TOR switch wiring solution:
In the current popular backbone topology, TOR switches are leaf switches, which are connected with backbone switches. In a 10G network, 10G server is connected to 10G switch through 10G SFP + DAC and cat6a / cat7 with 10G Optical module. 10G switch is connected to 40G backbone switch as leaf switch.
10G SFP+ DAC is characterized by low loss, high efficiency, energy saving and low cost, which can meet the growing cabling requirements of transmission rate, scalability and reliability. If you want to realize the connection between the server and the switch within 10m, it is recommended to select 10G SFP+ DAC.
by Administrator
What are the differences between 25G DAC and AOC cable?
by www.fiber-mart.com
25G Ethernet has been hitting the web world at a sudden rate and may eventually become the fastest IEEE Ethernet standard ever completed.
25G cable is divided into
25G SFP28 direct attach cable and 25G SFP28 active optical cable, both of them can transmit data at 25Gbps. What are the differences between them?
In this article, fiber-mart.com will focus on the differences between the two cables.
What is a 25G Direct Attach Cable?
25G DAC cable using silver conductor and foam insulation core, it has good attenuation performance and low delay performance, which make the signal transmission is correct, and can increase the transmission speed, is a short connection solution instead of the optical transceiver, the price is much cheaper than the same type of optical transceiver, in short distance connection applications has been widely welcomed.
What is a 25G Active Optical Cable?
25G AOC cable can be overcome the bandwidth limitation of traditional high-speed cable, and the 25G active optical cable can provide an ideal alternative solution for high-speed cable and short-distance SFP28 optical module, and the signal is more complete and higher performance. It is widely used in high-speed, high-density, and low-power data center networks.
What is difference in structure between 25G Direct Attach Cable and 25G Active Optical Cable?
The 25G DAC is made up of a copper cable and a fiber-optic transceivers at both ends. The connector is similar to the interface of the optical transceiver.But the connector modules on high-speed cables do not have expensive lasers, which greatly reduces the cost of short-range applications.
The 25G AOC consists of optical transceiver devices at both ends and composed of different length of OM3 or OM4 multimode optical fibers.The transceiver devices at both ends can provide the function of photoelectric conversion and optical transmission. This function ensures data transmission stability and application flexibility.
Compares to the 25G DAC, What are the advantages of 25G AOC?
1. The volume of 25G active optical cable is one-half of 25G high-speed cable, the weight is a quarter of it, so 25G active optical cable is much lighter than 25G high-speed cable;
2. 25G active optical cable also has better transmission performance and bit error rate, and the BER can reach 10-15;
3. 25G active optical cable has lower transmission power on the system link.
The 25G technology is the foundation of the 100G(4*25Gbps) Ethernet standard. Compared with the 40G technology, the 25G technology can provide higher port density and reduce cost, so the 25G technology has a promising prospect.
With the rapid development of 25G Ethernet technology, fiber-mart.com has introduced two types of cables, 25G SFP28 DAC and 25G SFP28 AOC to meet the 25G network needs of customers. You can also select our 25G DAC cable or 25G AOC cable customized service according to your needs.
by Administrator
News for Thursday 02 June, 2022
View all news for Thursday 02 June, 2022 on one page
Recent News
News archive