New Products
New Products
Indoor CATV EOC slave with 2 RJ45 ports
FS302 supplies one RF hybrid signal input port, one RF CATV output port and two 100M full-duplex RJ45 output Ethernet ports to FSve access to both TV and computer. FS302 supports bandwidth set, and supports to limit he max uplink and downlink bandwidth.
Features
Good anti-jamming capability with OFDM (kind of MCM, Multi-Carrier Modulation) and cFSnnel-adaptive technology.Highly adaptable to network, amplifier and distributorHighly effective filter, lower interference to CATVSupply VLAN, IGMP and QoSSupport SNMP, WEB and CLI managementSupport remote software upgradeManaged intensively by central EOC, support TELNET managementNo need to configure, start work once connected
Specification
System Parameter | Technical Index |
System Bandwidth | Physical layer data rate 200Mbps |
IP data throughput 100Mbps per channel | |
Modulation | OFDM;BSPK, QPSK, 1024/256/64/16/8-QAM |
MAC Protocol | TDMA and CSMA |
EOC technology | HomePlug AV |
Carrying Capability | 253 per channel, total 1012 slaves |
Protocol and Standard | IEEE 802.1Q |
IGMP v1, v2 | |
IEEE 802.1P QoS | |
NMS | WEB; CLI; SNMP |
Data Interface | Two 10/100Base-TX RJ45 input port |
Auto MDI/MDIX | |
Comply with 802.3, IEEE802.3u | |
TV Interface | One RF port |
Metric thread F type | |
Output level: 108dBμV | |
Insertion Loss: <1.5dB | |
Impedance: 75Ω | |
Hybrid Interface | One RF hybrid signal output ports |
Metric thread F type | |
Frequency: 2-870MHz | |
Output Level: 108dBμV | |
Impedance: 75Ω | |
Light Indicator | DATA (Cable connection LED) |
ETH1, ETH2 (Ethernet port LED) | |
SYS (System LED) | |
PW (power LED) |