New Products
New Products
Custom Video & Bi-Directional Data Optic Video Multiplexer, Singlemode, 20km
Video Channel | 1-16 | Bit Resolution | 8-Bit Digital Transmission |
Video Format | PAL, NTSC, SECAM | Video Interface | BNC 75 |
Wavelength | 1310nm/1550nm | Optical Connector | FC(Standard), ST/SC is also available |
Bandwidth | 6.5MHZ | Transmission Distance | Max 20km over one single-mode fiber |
Number of Data Channel | 1-4 Bi-Directional Data | Data Format | RS485(Standard), RS232/RS422 is also available |
Ethernet Support | 100Mbps(Standard, supporting half duplex), 30Mbps is also available | Ethernet/IP Connector | RJ-45, Auto MDI/MDI-X |
Number of Telephone Channels | 1 | Telephone Connector | RJ-11 |
Differential Gain | <1.5% | Differential Phase | <1.5 |
Input/Output Voltage | 1.0 Volt p-p | Signal-to-Noise Ratio(SNR) | >67 dB |
MTBF | >100,000 hours | Relative Humidity | 0%~95%(Non-condensing) |
Operating Temperature | -45C~+85 C | Storage Temperature | -45C~+85 C |
Key Features
Fiber Optic Video Transmitter + Fiber Optic Video ReceiverNo EMI or RFI and no ground loopsSupport up to 16 security cameraStandalone | Uncompressed Digital Composite Video over a single fiberPoint-to-Point or Daisy-Chain connectionSupport RS-485(Standard), RS-232 and RS-422 Data ProtocolsCoarse Wavelength Division Multiplexing (CWDM) technology |
Application
Fiber optic transmission of composite video in a simple, low-cost system
1-16 Channel Video fiber links use revolutionary digital technology to provide simultaneous long-range transmission of full-frame, real-time video signals for today's CCTV systems, just over one single-mode fiber. The optic digtal video multiplexer adopts the plug-and-play design which ensures ease of installation with no electrical or optical adjustment needed, supports RS-485, RS-422 and RS-232 data protocols and the front panel LED indicators adjacent to each multiplexer input connector provide an easy visual identification of the active channel.