New Products
New Products
MTP-8F to 4 LC Duplex SMF Cable Direct and Interconnect SolutionA simple MTP to LC breakout cable support high speed transmission in your data center.
Learn More
MTP cables are your best choice for high density fiber networks. It's specifically designed for fast ethernet, fiber channel, data center and gigabit ethernet applications. This 8 Fiber harness cable is used for a direct connection between QSFP+ to (4) SFP+ ports with no patch panels or intermediate trunks in between.
Please Note: MTP is a registered trademark of US Conec Ltd. Attenuation testing performed in accordance with EIA/TIA-455-171A.
Product Specifications
Connector A | MTP Female (pinless) | Connector B | LC UPC Duplex |
Fiber Mode | 10G OM3 50/125 m | Wavelength | 850/1300nm |
Insertion Loss | MTP0.35dB, LC0.3dB | Return Loss | MTP 20dB, LC 30dB |
Jacket OD | 3.0mm | Fan-Out Diameter | 2.0mm |
Installation Tensile Load | 100 N | Long-Term Tensile Load | 50 N |
Storage Temperature | -40C to +85C | Operating Temperature | -10C to +70C |
Cable Jacket | LSZH | Fiber Count | 8 Fibers |
Quality Certification
Quality and standards are the foundation of FiberZON. We are dedicated to providing customers with the outstanding, standards-compliant products and services.
FiberZON has passed many quality system verification, like CE, RoHS, FCC, established an internationally standardized quality assurance system and strictly implemented standardized management and control in the course of design, development, production, installation and service.
Please Note: Each cable is 100%optically inspected and tested for insertion loss before you receive it.
8 Fiber MTP-LC Harness Cable
MTP to 4 LC Connectors for High-Density Fiber Patching
0.35 dB Low IL MTP Connector
High-performanced MTP connector with 0.35 dB ultra low insertion loss.
0.3 dB Low IL LC Connector
The tightly tolerance ceramic ferrules ensuring consistent ultra low loss.
8 Fiber Counts Used
1-plug x 1-row applications, 4 Fibers used in each ends, requiring lateral signal transposition.
Heat Shrink Tube
A heat shrink tube divides the cable into four 2.0mm OD. fan outs, providing protections.
Used for a Direct Connection between QSFP+ to (4) SFP+ Ports
with No Patch Panels or Intermediate Trunks in Between